Español
Italiano
Deutsch
Français
Cudy AP1300 Outdoor 1167 Mbit/s White Power over Ethernet (PoE)
81,00 €, -6%
X
Condizioni di spedizione
Il tempo di consegna dipende da tanti fattori: disponibilità del prodotto, modalità di pagamento, metodo di consegna e servizi aggiuntivi.
Se scegli un pagamento posticipato, come bonifico o rateale, la data di consegna sarà fissata solo dopo la conferma del pagamento.
IMPORTANTE - COME SI ACCETTA LA MERCE
Al momento della consegna della merce da parte del corriere, il Cliente è tenuto a controllare:
- che l'imballo risulti integro, non danneggiato o comunque alterato, anche nei sigilli di chiusura.
Affinché la copertura assicurativa sia valida è condizione indispensabile che qualora il cliente dovesse riscontrare delle anomalie alla ricezione del prodotto dovrà accettarlo scrivendo sul documento fornito dal fattorino:
- SI ACCETTA CON RISERVA - COLLO SCONDIZIONATO
- SI ACCETTA CON RISERVA + descrizione dell'anomalia riscontrata
NON è sufficiente annotare:
- SI ACCETTA CON RISERVA
- SI ACCETTA CON RISERVA DI CONTROLLO
Bensì dovrà essere esplicitato il motivo della riserva in maniera dettagliata.
Una volta firmato il documento del corriere, il Cliente non potrà opporre alcuna contestazione. In mancanza di apposizione di riserva circostanziata eWeki.it non potrà in nessun caso essere ritenuta responsabile di eventuali anomalie riscontrate circa lo stato del prodotto, dopo l‘avvenuta consegna.
N.B. Imballo/Scatola del prodotto deve essere conservata fino ai termini della garanzia stessa. In caso di anomalia il cliente è tenuto comunque a:
- Notificare entro 3 giorni (anche se è consigliato farlo immediatamente), il danno riscontrato alla eweki.it.
Per eventuali differenze di Peso/Volume sarà contattato per accordare la nuova tariffa.
Brand: | Codice Produttore : 159437 | Ean: 6971690792893
Speedy Dual-Band AC1200 Wi-Fi
With MU-MIMO and dual-band features, the AC1200 Wi-Fi AP can connect to over 30 devices while minimizing latency. The maximum number of simultaneous connections per AP is 128 devices.
Boosted Wi-Fi Coverage with Beamforming
Tested Wi-Fi coverage performance in four scenarios, achieved by Beamforming technology and two external antennas. If your space is too large for one access point to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy AP.
Works in Rain, Thunder, Dust, Heat, Cold
The AP is protected by an IP65 standard case, shielding it from rain and dust when installed vertically. It also features 4 kV Lightning/Surge and 8 kV ESD protection for higher reliability in thunderstorms. Its working temperatures span from -40 °F to 149 °F (-40 ℃ to 65 ℃).
Mesh Networks
Seamless Roaming for Smooth Wi-Fi Experience
Enhance the Wi-Fi experience for your visitors by implementing a unified Wi-Fi name across your entire premises. With mesh technology, enjoy uninterrupted roaming as clients seamlessly connect to the strongest available Wi-Fi node without manual switching.
Plug-and-Play Mesh Installation
Simply Plug and Unplug for Mesh Setup
Connect the PoE adapter LAN port to a Cudy Mesh AP/router/Mesh unit/VPN Router/AC to add the new AP to the Mesh network. Feel free to unplug it or keep using Ethernet backhaul after pairing. (Requires firmware newer than 1.15.28, the other Cudy Mesh device needs to be purchased separately)
Leave the Rest to Adaptive Routing
Adaptive Routing improves the system's awareness of the capacity used by each node. Once the backhaul path is jammed by clients or interfered with by environmental factors, it will automatically switch to a better path for improved stability.
Guide to Wiring and Physical Installation
Gigabit Port with Two PoE Options
Supports two powering methods—
802.3at PoE (Max power: 18 W, Idle: 5 W)
48-57 V Passive PoE (Adapter included, not waterproof)
If you need to simplify the wiring, we recommend using a PoE Switch that powers multiple devices simultaneously. See Cudy PoE Switches for more information.
Mounting Kit Included
A mounting kit is included in the box, supporting—
Wall-Mounting
Pole-Mounting
Centralized AP Management
Easily manage up to 200 access points with Cudy AP Controller（Model:C200P）, enabling efficient batch configuration and firmware updates through a unified interface.
Features
Security
Protocols
Management features
Ports & interfaces
Power
Design
Antenna
Performance
Technical details
Weight & dimensions
Packaging data
Packaging content
Other features
Operational conditions
Logistics data
Deposito 28
Spedizione e Consegna
Il tuo ordine verrà spedito entro il tempo indicato sulla pagina del prodotto. Una volta spedito, la consegna avviene generalmente entro 24/48 ore lavorative.
Nota sui prodotti voluminosi:
Per garantire un trasporto più sicuro e adeguato, in caso di articoli particolarmente ingombranti potremmo affidarci a un corriere specializzato. In questi casi i tempi di consegna potrebbero essere leggermente più lunghi.
Brand: | Codice Produttore : 159437 | Ean: 6971690792893
Speedy Dual-Band AC1200 Wi-Fi
With MU-MIMO and dual-band features, the AC1200 Wi-Fi AP can connect to over 30 devices while minimizing latency. The maximum number of simultaneous connections per AP is 128 devices.
Boosted Wi-Fi Coverage with Beamforming
Tested Wi-Fi coverage performance in four scenarios, achieved by Beamforming technology and two external antennas. If your space is too large for one access point to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy AP.
Works in Rain, Thunder, Dust, Heat, Cold
The AP is protected by an IP65 standard case, shielding it from rain and dust when installed vertically. It also features 4 kV Lightning/Surge and 8 kV ESD protection for higher reliability in thunderstorms. Its working temperatures span from -40 °F to 149 °F (-40 ℃ to 65 ℃).
Mesh Networks
Seamless Roaming for Smooth Wi-Fi Experience
Enhance the Wi-Fi experience for your visitors by implementing a unified Wi-Fi name across your entire premises. With mesh technology, enjoy uninterrupted roaming as clients seamlessly connect to the strongest available Wi-Fi node without manual switching.
Plug-and-Play Mesh Installation
Simply Plug and Unplug for Mesh Setup
Connect the PoE adapter LAN port to a Cudy Mesh AP/router/Mesh unit/VPN Router/AC to add the new AP to the Mesh network. Feel free to unplug it or keep using Ethernet backhaul after pairing. (Requires firmware newer than 1.15.28, the other Cudy Mesh device needs to be purchased separately)
Leave the Rest to Adaptive Routing
Adaptive Routing improves the system's awareness of the capacity used by each node. Once the backhaul path is jammed by clients or interfered with by environmental factors, it will automatically switch to a better path for improved stability.
Guide to Wiring and Physical Installation
Gigabit Port with Two PoE Options
Supports two powering methods—
802.3at PoE (Max power: 18 W, Idle: 5 W)
48-57 V Passive PoE (Adapter included, not waterproof)
If you need to simplify the wiring, we recommend using a PoE Switch that powers multiple devices simultaneously. See Cudy PoE Switches for more information.
Mounting Kit Included
A mounting kit is included in the box, supporting—
Wall-Mounting
Pole-Mounting
Centralized AP Management
Easily manage up to 200 access points with Cudy AP Controller（Model:C200P）, enabling efficient batch configuration and firmware updates through a unified interface.
Features
Security
Protocols
Management features
Ports & interfaces
Power
Design
Antenna
Performance
Technical details
Weight & dimensions
Packaging data
Packaging content
Other features
Operational conditions
Logistics data
Deposito 28