524,00 €, -69%
X
Il tempo di consegna dipende da tanti fattori: disponibilità del prodotto, modalità di pagamento, metodo di consegna e servizi aggiuntivi.
Se scegli un pagamento posticipato, come bonifico o rateale, la data di consegna sarà fissata solo dopo la conferma del pagamento.
Al momento della consegna della merce da parte del corriere, il Cliente è tenuto a controllare:
Affinché la copertura assicurativa sia valida è condizione indispensabile che qualora il cliente dovesse riscontrare delle anomalie alla ricezione del prodotto dovrà accettarlo scrivendo sul documento fornito dal fattorino:
NON è sufficiente annotare:
Bensì dovrà essere esplicitato il motivo della riserva in maniera dettagliata.
Una volta firmato il documento del corriere, il Cliente non potrà opporre alcuna contestazione. In mancanza di apposizione di riserva circostanziata eWeki.it non potrà in nessun caso essere ritenuta responsabile di eventuali anomalie riscontrate circa lo stato del prodotto, dopo l‘avvenuta consegna.
N.B. Imballo/Scatola del prodotto deve essere conservata fino ai termini della garanzia stessa. In caso di anomalia il cliente è tenuto comunque a:
Per eventuali differenze di Peso/Volume sarà contattato per accordare la nuova tariffa.
Brand: D-LINK | Codice Produttore : DEM-431XT | Ean: 0790069353130
Designed to support distances up to 550 metres, the DEM-431XT is a high performance 850nm Multi-Mode SFP+ transceiver. Supporting Full-duplex, 10 Gigabit speeds on Multi-Mode fibre cables. The DEM-431XT is 802.3ae 10GBASE-SR compliant and supports Full-duplex 802.3x Flow control. The DEM-431XT provides the necessary signal amplification for data to be transmitted to the network cable from the port, and vice versa.
D-Link’s 10G SFP+ Module series are hot-swappable SFP+ transceivers that plug into SFP+ slots on switches and support 10G Ethernet. The D-Link 10GBASE SFP+ Module Series transceivers offer customers a wide variety of 10G Ethernet connectivity options for data centers, enterprise wiring closets, and service provider transport applications.
Enhanced Small Form-factor Pluggable Format
The transceivers use the Enhanced Small Formfactor Pluggable format (SFP+). The SFP+ form factor is smaller than other form factors such as Xenpak, X2, and 10G XFP, ensuring lower costs, lower power disruption, and higher port density. They provide the necessary signal amplification for data to be transmitted to the network cable from the port, and vice versa, for the port to receive data from the network cable.
Hot Pluggable
All D-Link transceivers are hot-pluggable. You can connect a transceiver while the system is powered on without causing any problems. This permits modules to be added or removed without interrupting the network.
10G Ethernet speeds
The transceivers all support 10G Ethernet, which results in very fast data transmissions of up to 10 Gbit/s. This is 10 times faster than Gigabit Ethernet and enables the switch to handle faster and higher data transmissions, making it very suitable for business needs.
Il tuo ordine verrà spedito entro il tempo indicato sulla pagina del prodotto. Una volta spedito, la consegna avviene generalmente entro 24/48 ore lavorative.
Per garantire un trasporto più sicuro e adeguato, in caso di articoli particolarmente ingombranti potremmo affidarci a un corriere specializzato. In questi casi i tempi di consegna potrebbero essere leggermente più lunghi.
Brand: D-LINK | Codice Produttore : DEM-431XT | Ean: 0790069353130
Designed to support distances up to 550 metres, the DEM-431XT is a high performance 850nm Multi-Mode SFP+ transceiver. Supporting Full-duplex, 10 Gigabit speeds on Multi-Mode fibre cables. The DEM-431XT is 802.3ae 10GBASE-SR compliant and supports Full-duplex 802.3x Flow control. The DEM-431XT provides the necessary signal amplification for data to be transmitted to the network cable from the port, and vice versa.
D-Link’s 10G SFP+ Module series are hot-swappable SFP+ transceivers that plug into SFP+ slots on switches and support 10G Ethernet. The D-Link 10GBASE SFP+ Module Series transceivers offer customers a wide variety of 10G Ethernet connectivity options for data centers, enterprise wiring closets, and service provider transport applications.
Enhanced Small Form-factor Pluggable Format
The transceivers use the Enhanced Small Formfactor Pluggable format (SFP+). The SFP+ form factor is smaller than other form factors such as Xenpak, X2, and 10G XFP, ensuring lower costs, lower power disruption, and higher port density. They provide the necessary signal amplification for data to be transmitted to the network cable from the port, and vice versa, for the port to receive data from the network cable.
Hot Pluggable
All D-Link transceivers are hot-pluggable. You can connect a transceiver while the system is powered on without causing any problems. This permits modules to be added or removed without interrupting the network.
10G Ethernet speeds
The transceivers all support 10G Ethernet, which results in very fast data transmissions of up to 10 Gbit/s. This is 10 times faster than Gigabit Ethernet and enables the switch to handle faster and higher data transmissions, making it very suitable for business needs.