78,20 €, -45%
X
Il tempo di consegna dipende da tanti fattori: disponibilità del prodotto, modalità di pagamento, metodo di consegna e servizi aggiuntivi.
Se scegli un pagamento posticipato, come bonifico o rateale, la data di consegna sarà fissata solo dopo la conferma del pagamento.
Al momento della consegna della merce da parte del corriere, il Cliente è tenuto a controllare:
Affinché la copertura assicurativa sia valida è condizione indispensabile che qualora il cliente dovesse riscontrare delle anomalie alla ricezione del prodotto dovrà accettarlo scrivendo sul documento fornito dal fattorino:
NON è sufficiente annotare:
Bensì dovrà essere esplicitato il motivo della riserva in maniera dettagliata.
Una volta firmato il documento del corriere, il Cliente non potrà opporre alcuna contestazione. In mancanza di apposizione di riserva circostanziata eWeki.it non potrà in nessun caso essere ritenuta responsabile di eventuali anomalie riscontrate circa lo stato del prodotto, dopo l‘avvenuta consegna.
N.B. Imballo/Scatola del prodotto deve essere conservata fino ai termini della garanzia stessa. In caso di anomalia il cliente è tenuto comunque a:
Per eventuali differenze di Peso/Volume sarà contattato per accordare la nuova tariffa.
Brand: D-LINK | Codice Produttore : DES-1016D | Ean: 0790069221279
16-Port 10/100Mbps Switch for SOHO/Workgroup
10/100Mbps Unmanaged Switch The DES-1016D is an unmanaged 10/100Mbps switch designed to enhance workgroup performance while providing a high level of flexibility. Powerful yet easy to use, this device allows users to simply plug any port to either a 10Mbps or 100Mbps network to multiply bandwidths, boost response time and satisfy heavy load demands.
16 Auto-sensing 10/100Mbps Ports
The switch comes with 16 10/100Mbps ports, allowing a small workgroup to flexibly integrate to Ethernet and Fast Ethernet. These intelligent ports detect the network speed and auto-negotiate between 100BASE-TX and 10BASE-T, as well as between full and half-duplex.
Flow Control for Secure Transmission
All ports support flow control. This function minimizes dropped packets by sending out collision signals when the port's receiving buffer is full.
Auto-negotiation of MDI/MDIX Cross Over
All ports support auto-negotiation of MDI/MDIX cross over. This eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, a hub or a switch, using the usual straight-through twisted-pair cable.
Plug-and-Play
With 16 plug-and-play ports, the switch is a perfect choice for workgroups to upgrade performance in a client/server environment. The ports can be connected to servers in fullduplex, or hubs in half-duplex.
Direct Connection to Workstations
With low-cost connection per-port, the switch can be set up for direct connection from the PCs. This relieves data bottleneck by giving each workstation a dedicated bandwidth on the network.
Il tuo ordine verrà spedito entro il tempo indicato sulla pagina del prodotto. Una volta spedito, la consegna avviene generalmente entro 24/48 ore lavorative.
Per garantire un trasporto più sicuro e adeguato, in caso di articoli particolarmente ingombranti potremmo affidarci a un corriere specializzato. In questi casi i tempi di consegna potrebbero essere leggermente più lunghi.
Brand: D-LINK | Codice Produttore : DES-1016D | Ean: 0790069221279
16-Port 10/100Mbps Switch for SOHO/Workgroup
10/100Mbps Unmanaged Switch The DES-1016D is an unmanaged 10/100Mbps switch designed to enhance workgroup performance while providing a high level of flexibility. Powerful yet easy to use, this device allows users to simply plug any port to either a 10Mbps or 100Mbps network to multiply bandwidths, boost response time and satisfy heavy load demands.
16 Auto-sensing 10/100Mbps Ports
The switch comes with 16 10/100Mbps ports, allowing a small workgroup to flexibly integrate to Ethernet and Fast Ethernet. These intelligent ports detect the network speed and auto-negotiate between 100BASE-TX and 10BASE-T, as well as between full and half-duplex.
Flow Control for Secure Transmission
All ports support flow control. This function minimizes dropped packets by sending out collision signals when the port's receiving buffer is full.
Auto-negotiation of MDI/MDIX Cross Over
All ports support auto-negotiation of MDI/MDIX cross over. This eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, a hub or a switch, using the usual straight-through twisted-pair cable.
Plug-and-Play
With 16 plug-and-play ports, the switch is a perfect choice for workgroups to upgrade performance in a client/server environment. The ports can be connected to servers in fullduplex, or hubs in half-duplex.
Direct Connection to Workstations
With low-cost connection per-port, the switch can be set up for direct connection from the PCs. This relieves data bottleneck by giving each workstation a dedicated bandwidth on the network.